Oil Pressure Switch -F22-: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to OIL FILTER HOUSING AND OIL PRESSURE SWITCH OVERVIEW .

NOTE:

Replace the seal.

To prevent oil loss, insert the new oil pressure switch in the connecting pieces immediately.

-- Check the oil level. Refer to the ENGINE OIL, FILLING AND CHECKING LEVEL .