LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (3.0L - Lubrication - Engine Code(S): CCBA (Cabriolet)) >> 17 Lubrication >> Removal And Installation >> Oil Pressure Regulation Valve -N428- >> Installing

Oil Pressure Regulation Valve -N428-: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace O-ring -2-.

-- Tighten the screw on the oil pressure regulation valve. Refer to Fig 1.

Fig 1: Identifying Oil Pressure Regulation Valve -N428-
GWWA17-10208Courtesy of AUDI OF AMERICA, LLC

-- Install the oil cooler. Refer to ENGINE OIL COOLER .

scientia non olet · About LEMON Manuals