Oil Level Thermal Sensor -G266-: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Level Thermal Sensor G266

Courtesy of AUDI OF AMERICA, LLC

-- Drain the engine oil. Refer to the ENGINE OIL, EXTRACTING AND REPLACING OIL FILTER .

-- Disconnect the connector -3-.

-- Remove the nuts -1- and the oil level thermal sensor -4-.