Engine Speed Sensor -G28-: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, to do this, loosen the mounting parts -1, 2, 3-.

Fig 1: Identifying Noise Insulation Components

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

Fig 2: Location Engine Speed (RPM) Sensor -G28-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the RPM sensor.