Coolant Pump: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications, refer to COOLANT PUMP, COOLANT THERMOSTAT AND CONNECTING PIECE OVERVIEW .
-- Clean any oil or grease off the sealing surfaces.
-- Install the power steering pump ribbed belt pulley. Refer to OVERVIEW - POWER STEERING PUMP .
-- Connect the coolant hose to the coupling. Refer to Figure.
-- Installing the ribbed belt:
- RIBBED BELT, VEHICLES WITH HYDRAULIC POWER STEERING
- RIBBED BELT, VEHICLES WITH ELECTRO-MECHANICAL POWER STEERING
-- Install the coolant pipes. Refer to COOLANT PIPES OVERVIEW .
-- Fill with coolant, refer to FILLING .