Charge Air Cooling Pump -V188-: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Tighten the nut the charge air cooling pump bracket. Refer to Figure.

-- Install the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Install the front wheels. Refer to WHEELS AND TIRES .

-- Fill with coolant. Refer to FILLING .