After-Run Coolant Pump -V51-: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specification, refer to AFTER-RUN COOLANT PUMP -V51- OVERVIEW .
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Fill with coolant. Refer to FILLING .
-- Install the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .