LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (3.0L - Exhaust System, Emission Controls - Engine Code(S): CCBA (Cabriolet)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications >> Notes

Fastener Tightening Specifications: Notes

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Bracket for Secondary Air Injection (AIR) pump motor, nut and bolt - 9
Bracket for the secondary air injection hose - 9
Catalytic converter, nut 1, 4 - 23
Center muffler, nut 1 - 23
Front clamping sleeve, nut - 23
Heat shield - 10
Left Secondary Air Injection (AIR) combination valve - 9
Rear clamping sleeve, nut - 23
Right Secondary Air Injection (AIR) combination valve - 9
Secondary air hose - 9
Suspended mount 2 - 23
Suspended mount 1, 3 - 20
  • 1 Always replace
  • 2 For bolt tightening clarification, refer to MUFFLER OVERVIEW  and see items -2 and 22-
  • 3 For bolt tightening clarification, refer to MUFFLER OVERVIEW  and see items -16-
  • 4 Coat the thread with hot bolt paste
scientia non olet · About LEMON Manuals