Tail Pipe

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Chain Pipe Cutter VAS 6254

Procedure

Fig 1: End Pipe, Replacing

Courtesy of AUDI OF AMERICA, LLC

Tightening specifications, refer to MUFFLER OVERVIEW .

-- Separate the tailpipe -1- at the separating point -C- using VAS 6254.

-- Mount the tail pipe -3- up to the marking -A-. Align the slot in the tail pipe with the marking -B-.

-- Tighten clamping sleeve nut -2-.