LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (3.0L - Exhaust System, Emission Controls - Engine Code(S): CCBA (Cabriolet)) >> 26 Exhaust System, Emission Controls >> Removal And Installation >> Secondary Air Injection Sensor 1 -G609- >> Installing

Secondary Air Injection Sensor 1 -G609-: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

Secure all hose connections with hose clamps of the same type as those equipped by the factory,

In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.

scientia non olet · About LEMON Manuals