Secondary Air Injection Right Combination Valve: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications
NOTE:
Replace the gasket.
The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.
Secure all hose connections with hose clamps of the same type as those equipped by the factory,
To mount the air guide hoses on their connectors securely, spray the bolts on the used clamps with rust remover before installing.
-- Install the right catalytic converter. Refer to RIGHT CATALYTIC CONVERTER
-- Install the plenum chamber bulkhead. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Install the front muffler. Refer to FRONT MUFFLER .