Secondary Air Injection Pump Motor -V101-: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification, refer to SECONDARY AIR INJECTION SYSTEM OVERVIEW .

NOTE:

Replace the O-rings.

-- Install the bumper cover end plate. Refer to "Front Bumper" in FRONT BUMPER .

-- Install the noise insulation. Refer to NOISE INSULATION .