Right Catalytic Converter: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Connector To Fuel Injectors (Right Cylinder Head)

Courtesy of AUDI OF AMERICA, LLC

The transmission is removed. Refer to Removal and Installation or Removal and Installation .

NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the -1- Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) -G130- connector from the bracket, disconnect it and free up the wire.

NOTE:

Ignore -2 and 3-.

-- Remove the right catalytic converter.

NOTE:

The right catalytic converter is already removed for removing the transmission.