Align The Tail Pipes

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

Fig 1: Checking Distance Of End Pipes At Left/Right To Bumper

Courtesy of AUDI OF AMERICA, LLC

Tightening specification, refer to MUFFLER OVERVIEW .

-- Check distance of left and right tail pipes to bumper:

Dimension -x- left = dimension -x- right.

Correct dimension "x" as follows if necessary:

Fig 2: Identifying Brace Threaded Connection -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the brace threaded connection -arrow- between the exhaust pipes.

-- Adjust the distance of the rear mufflers to each other.