Input Shaft, Output Shaft, Reverse Drive Gear And Shift Rails/Shift Forks Assembly Overview: Notes
WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Input Shaft, Output Shaft, Reverse Drive Gear And Shift Rails/Shift Forks Assembly
- Transmission Housing
- With differential and pinion
- Oil Collector Tray
- Clipped into the bearing bracket and the gearshift rail/shift fork for 3rd and 4th gears
- Input and Output Shafts with Shift Fork Group
- Disassembling and assembling, refer to SHIFT FORK GROUP, INPUT SHAFT, 1ST, 2ND AND REVERSE GEAR OUTPUT SHAFTS ASSEMBLY OVERVIEW
- Reverse Drive Gear
- With support/reverse shaft
- Reverse drive gear assembly overview REVERSE DRIVE GEAR ASSEMBLY OVERVIEW
- Magnet
- Clean