Special Tools

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Counter Hold Tool 10 - 201

Fig 1: Identifying Counter-Holder Tool 10 - 201
Courtesy of AUDI OF AMERICA, LLC
Sleeve 40 - 103

Fig 2: Identifying Sleeve 40 - 103
Courtesy of AUDI OF AMERICA, LLC
Retainer 3036

Fig 3: Identifying Retainer 3036
Courtesy of AUDI OF AMERICA, LLC
Spanner Wrench 3212

Fig 4: Identifying Spanner Wrench 3212
Courtesy of AUDI OF AMERICA, LLC
Locking Pin T10060 A

Fig 5: Identifying Locking Pin T10060 A
Courtesy of AUDI OF AMERICA, LLC
Assembly Tool T10122

Fig 6: Identifying Assembly Tool T10122
Courtesy of AUDI OF AMERICA, LLC
Pulling Hook T20143/2

Fig 7: Identifying Pulling Hook T20143/2
Courtesy of AUDI OF AMERICA, LLC
Assembling Device T40048

Fig 8: Identifying Assembly Tool T40048
Courtesy of AUDI OF AMERICA, LLC
Dial Gauge 0-10 mm VAS 6079

Fig 9: Identifying Dial Gauge 0-10 mm VAS 6079
Courtesy of AUDI OF AMERICA, LLC
Pilot Drift VW 222 A

Fig 10: Identifying Drift VW 222 A
Courtesy of AUDI OF AMERICA, LLC
Dial Gauge Holder VW 387

Fig 11: Identifying Dial Gauge Holder VW 387
Courtesy of AUDI OF AMERICA, LLC
Thrust Plate VW 402

Fig 12: Identifying Thrust Plate VW 402
Courtesy of AUDI OF AMERICA, LLC
Tube 31.5 mm Dia. VW 418 A

Fig 13: Identifying Tube 31.5 mm Dia. VW 418 A
Courtesy of AUDI OF AMERICA, LLC
Tube 28 mm Dia. 100 mm VW 421

Fig 14: Identifying Tube 28 mm Dia. 100 mm VW 421
Courtesy of AUDI OF AMERICA, LLC
Not illustrated:
Assembly Device T10122/1
Pull Sleeve T10122/2
Assembly Device T40048/1
Pull Sleeve T40048/2
Cylinder Gauge VAS 6078 or Inside Micrometer Set 18-100 mm US1033/S
Engine and Transmission Holder VAS 6095
Engine and Transmission Holder VAS 6095