Securing The 2.0L TFSI Engine To The Manual Transmission

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission / Engine Bolts

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1 ¹⁾	M10x50 ²⁾	65
2 ³⁾ , 7	M12 x 100 ⁴⁾⁵⁾	30 + 90°
3 ⁶⁾ , 6	M12 x 75 ⁴⁾⁵⁾	30 + 90°
4, 5 ⁶⁾	M12 x 120 ⁴⁾⁵⁾	30 + 90°
8 ••• 10	M10 x 75 ⁴⁾⁵⁾	15 + 90°
11	M12 x 50 ⁴⁾⁵⁾	30 + 90°
A	Alignment sleeve for centering
¹⁾ Mount the auxiliary adapter. ²⁾ Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used. ³⁾ Also secures that starter; with an additional spacer sleeve between the starter and the transmission. ⁴⁾ Audi A4 through VIN 8K-9-066499 and Audi A5 through VIN 8T-9-007999: Replace the aluminum bolts. ⁵⁾ Audi A4 from VIN 8K-9-066500 and Audi A5 from VIN 8T-9-008000: Aluminum bolts can be used twice; refer to TRANSMISSION, INSTALLING . ⁶⁾ Also attaches the bracket for the electric wire.

Audi A4 from VIN 8K-9-066500 and Audi A5 from VIN 8T-9-008000: The aluminum bolts -2 through 11- may be used twice. Therefore, the bolts must be marked with two notches "X" made by a chisel after they have be used the first time -arrow-.