Fastener Tightening Specifications: Notes
WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Bolts and nuts | ||
| M6 | 9 | |
| M7 | 15 | |
| M8 | 20 | |
| M10 | 40 | |
| M12 | 65 | |
| Clamping plate to Shift lever support | - | 23 |
| Connecting rod | - | 20 |
| Gearshift lever nut 1 | - | 20 |
| Joint piece between the selector rod and shift lever | ||
| Bolt | - | 23 |
| Nut | - | 10 |
| Lower stop for the transmission mount 1 | - | 20 + 90° |
| Mount for the shift lever support | - | 8 |
| Push rod | - | 20 |
| Sealing boot | - | 4 |
| Selector shaft cover 1 | - | 10 + 45° |
| Shift lever support | - | 23 |
| Transmission fluid filler plug | - | 45 |
| Transmission neutral position sensor 1 | - | 10 + 45° |
| Transmission range gear recognition switch | - | 20 |
| Transmission shift lever 1 | - | 20 |
| Tunnel crossmember | ||
| - Bolt | - | 70 |
| - Nut | - | 20 |
| Tunnel Support | ||
| - Bolt | - | 40 |
| - Nut | - | 20 |
|
||