Transmission Mount: Installing

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to TUNNEL CROSSMEMBER, TRANSMISSION MOUNT AND TRANSMISSION SUPPORT OVERVIEW .

-- Mount the transmission support -3- on the transmission mount -5- and tighten the nut -4- hand-tight.

-- Tighten the lower stop -2- with the bolts -1-.

-- Tighten the nut -4-.

-- Install the transmission support and transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT .