Noise Insulation: Removing

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the shift lever knob with the shift lever boot. Refer to SHIFT KNOB WITH SHIFT LEVER BOOT .

-- Remove the multimedia system control head -E380-. Refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .

Fig 1: Releasing Tabs Raise Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Release the tabs -1- in direction of -arrow-. Raise the rear noise insulation when doing this.

Fig 2: Identifying Noise Insulation Over Shift Mechanism

Courtesy of AUDI OF AMERICA, LLC

-- Pull the noise insulation off the tabs -3-.

-- Pull the boot -2- off the gearshift lever in direction of -arrow-.