Securing On Engine And Transmission Holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Holding Plate VW 309
Hook and Support Tool T40197
Engine and Transmission Holder VAS 6095
Shop Crane -Load Cap=700-1200kg VAS 6100

Procedure

Fig 1: Identifying Transmission Holding Fixture Setup

Courtesy of AUDI OF AMERICA, LLC

Transmission secured with the VAS 6100, refer to TRANSMISSION, TRANSPORTING .

-- Install the VW 309 on the T40197.

-- Place the transmission into the VAS 6095 using the VAS 6100.

Fig 2: Identifying Transmission Holding Fixture Setup

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.