ATF Capacity

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Capacities	S-Tronic Transmission 0B5 - ATF
Original filling by the manufacturer	Approximately 7 to 7.5 liters ¹⁾
ATF change quantity	Refer to the appropriate Fluid Capacity Tables service information
Change interval	MAINTENANCE, DIAGNOSIS (MAINTENANCE SCHEDULE) (CABRIOLET) -- Replace the ATF change filter, if equipped ²⁾
Lubricant	ATF for S-Tronic transmission 0B5,
¹⁾ The manufacturer fills the transmission with 0.5 liters above the normal level. The 0.5 liter overfilling serves to fill the empty ATF cooler after the transmission is installed. ²⁾ The replaceable ATF filter must also be replaced when the ATF is changed for vehicles with a replaceable ATF filters, refer to ATF CAPACITY .

CAUTION:

There is a risk of damaging the transmission.

Only use replacement part ATF for the S-Tronic transmission 0B5.
Using other types of ATF can result in the malfunctions or transmission failure.
The ATF filler tool must be clean and the ATF must not be mixed with any other oils.

Transmissions with an ATF filter -2-

Fig 1: Identifying ATF Filter -2-

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of damaging the transmission.

Always replace the ATF filter -2- every time the ATF is changed.

-- Replace the ATF filter. Refer to ATF FILTER .