Tightening Specification And Sequence, Front Final Drive Cover

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tightening Specification And Sequence, Front Final Drive Cover

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace bolts that are tightened to the specification.

-- Tighten the bolts in three steps in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 ••• 10-	3 Nm
2.	-1 ••• 10-	20 Nm
3.	-1 ••• 10-	Tighten 90° further