Secondary Air Injection Sensor 1 -G609-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
NOTE:
Replace the O-ring.
The hose connections as well as the air duct pipes and hoses must be free of oil and grease before installing.
Secure all hose connections with hose clamps that are specific to that model. Refer to the Parts Information.