Catalytic Converter, Removing And Installing, Right (Bank 1): Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Catalytic converter and front muffler tightening specifications. Refer to OVERVIEW - EMISSIONS CONTROL .
Install in reverse order of removal while noting the following:
-- During installation, all cable ties must be installed at the same location.
-- Replace the seals and self-locking nuts.
-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .