Wheel, Mounting
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Coat the wheel centering seat with protective material. Refer to WHEEL CENTERING SEAT, PROTECTING AGAINST CORROSION .
- When mounting a wheel, tighten all wheel bolts uniformly by hand.
- Tighten the wheel bolts diagonally to approximately 30 Nm.
- Lower the vehicles onto the floor. Using the torque wrench, tighten all wheel bolts to the tightening specification in a diagonal sequence. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .
CAUTION:
- Install all wheel bolts evenly by hand.
- Tighten the wheel bolts diagonally to approximately 30 Nm.
- Using the torque wrench, tighten the wheel bolts to the tightening specification in a diagonal sequence.