Valve, Removing And Installing, Rubber Valve
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Valve Fitting Tool :VAS6459
- Make sure wheel rim is clean.
-- Using the :VAS6459 -1-, insert a new tire valve.
-- Remove the valve insert.
-- Inflate tire to approximately 3 to 4 bar (43.51 to 58.01 psi), tire bead must slip audibly over rim hump when doing this.
-- Install the valve insert.
-- Check the tire pressure for specified pressure.
-- Balance the tire.