Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Hold the cap -1- flush against the opening in the aluminum rim.
-- Line up the Volkswagen logo on the cap with the valve so that the logo is centered over the valve -2-.
-- Press on the cap so that it is secure inside the opening in the aluminum rim.
-- Make sure the cap it secure inside the aluminum rim.