General Information
Check for possible influences upon the headlamp adjustment, check the adjustment itself, and if needed, adjust the headlamps. Refer to
Always switch off headlamps and remove ignition key before working on headlamps.
Familiarity with the function and operation of the lighting system is needed if there are customer concerns.
Additional Information:
Refer to Owner's Manual.
Malfunction Recognition and Malfunction Indicator
The vehicle electrical system control module is equipped with On Board Diagnostics (OBD) which facilitates fault finding for the headlamps.
The "Guided Fault Finding" function is to be used for troubleshooting of one of the systems described as in service information "Vehicle Diagnosis, Testing and Information System". Refer to VEHICLE DIAGNOSTIC TESTER .