Fuel Pressure Sensor: Removing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove intake manifold.

-- Open the high pressure line union nut at the fuel rail.

-- Remove the Fuel Pressure Sensor -G247- bolt -1-.

Fig 1: Component Location View From Inside From Right Cylinder Head

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The Installation Location May Differ On Vehicle From MY 2009.

-- Remove the Fuel Pressure Sensor -G247- with the high pressure line.

NOTE:

Do Not Change The Angles Of The High Pressure Lines.