Installation Location: At The Front On The Engine (Running Change In My 2009)

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Components Located On Front Of Engine With An Plastic Intake Manifold)

Courtesy of AUDI OF AMERICA, LLC

1 - Knock Sensor (KS) 2 -G66- (brown connector)

2 - Knock Sensor (KS) 1 -G61- (black connector)

3 - Fuel Metering Valve -N290-

4 - Intake Manifold Runner Position Sensor -G336-

5 - Fuel Pressure Sensor -G247-

6 - Intake manifold runner control valve -N316- (CVTS tumble flaps)

7 - Intake Manifold Tuning (IMT) Valve -N156-

8 - Intake Manifold Runner Position Sensor 2 -G512-

9 - Fuel Metering Valve -N290-

10 - Knock Sensor (KS) 4 -G199- (black connector)

11 - Knock Sensor (KS) 3 -G198- (brown connector)