Central Valve, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal. Note The Following:

Tightening Specifications. Refer to OVERVIEW - CENTRAL VALVE .

-- Install the central valve and bracket.

-- Install the bolts.

-- Install the DRC line connections for the appropriate lines on the central valve.

NOTE:

Through 09/02/2013 central valves -1 and 2- with shut-off valves -3- and lock nuts -4- are installed.

The central valve through 09/02/2013 are filled when new and are sealed by the shut-off valve. The shut-off valve is secured with lock nuts.

If a new central valve with shut-off valves and lock nuts is installed after connecting the DRC lines -5 and 6- or -9 and 10- open the shut-off valves completely and secure using lock nuts. Refer to OVERVIEW - CENTRAL VALVE .

From 09/02/2013 the central valves are installed with plugs.

The central valves from 09/02/2013 are not filled when new because the shut-off valve/lock nuts are replaced by plugs.

Fill the DRC system. Refer to DYNAMIC RIDE CONTROL (DRC), SYSTEM DRAINING AND FILLING .