Refrigerant Lines, Disconnecting And Connecting At Condenser, RS Models: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Audi RS 4 and Audi RS 5

Special tools and workshop equipment required

Engine Bung Set:VAS6122

NOTE:

There are different versions of the condenser. Ensure the correct version and allocation before installing. Refer to CONDENSER, CHECKING VERSION and the Parts Information.

It may be necessary to evacuate the refrigerant circuit and remove the refrigerant pipes from the condenser in order to remove the condenser from the front end or to remove the radiator depending on the version of the radiator and the condenser (for example, on the Audi RS 4 and the Audi RS 5). Refer to CONDENSER, REMOVING AND INSTALLING .

On the Audi RS 4 and Audi RS 5, a different version of the condenser is installed than as on other vehicles of this series and the length of the refrigerant lines may also differ from other vehicles. Pay attention to the correct allocation and refrigerant R134a capacities. Refer to APPROVED REFRIGERANT OILS AND REFRIGERANT OIL CAPACITIES and the Parts Information.