LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Air Conditioning (Overview) (Coupe)) >> 87 Air Conditioning >> Refrigerant Circuit >> Condenser, Removing And Installing >> Condenser, Checking Version >> Notes

Condenser, Checking Version: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Depending on when the vehicle was manufactured, on the version of the vehicle and on the engine, different condensers are installed on these vehicles. Refer to the Parts Information. These condensers different in their inner construction and volume. The refrigerant circuit capacity depends on the condenser. Always see which version of the condenser is installed when determining the refrigerant capacity.

Currently condensers made by different manufacturers are being installed ("Denso" and "Showa/Keihin"). Each has specific distinguishing marks.

A condenser from one manufacturer can have a different construction but from the outside only the part number is different. The construction (different flow distribution, different inner volume) determines the refrigerant capacity for the refrigerant circuit. Refer to REFRIGERANT CAPACITIES .

CHECKING 

-- Remove the bolts (or clips) -1, 2, 3 and 5-. Refer to LOCK CARRIER .

Fig 1: Front Lock Carrier Cover
GWWA63-10231Courtesy of AUDI OF AMERICA, LLC

-- Lift the cover -4- on the lock carrier and disengage it on the radiator grille. Refer to .