Left Timing Chain Cover, Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Left Timing Chain Cover, Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten The Bolts And Threaded Pin To 9 Nm In The Following Sequence: -1 To 8-.

NOTE:

The Brackets -arrows A And B- Are Connected With The Left Timing Chain Cover.

Right Timing Chain Cover, Tightening Specifications And Sequence

Fig 2: Identifying Right Timing Chain Cover, Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten The Bolts And Threaded Pin To 9 Nm In The Following Sequence: -1 To 8-.

NOTE:

The Brackets -Arrows A And B- Are Attached To The Right Timing Chain Cover.