Timing Mechanism Drive Chain, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Engine/Transmission Subassembly Removed; Engine And Transmission Separated. Refer To ENGINE AND TRANSMISSION, SEPARATING .
- Engine secured with Scissor Lift Table - Q7 Set Articulated Joint Support:VAS6131/13-7 .
-- Remove The Lower Timing Chain Cover. Refer To LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
-- Remove The Camshaft Timing Chains. Refer To CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
-- Remove The Power Take-Off Drive Chain. Refer To POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
-- Press The Drive Chain Tensioner Guide Rail In Direction Of -Arrow- And Secure The Chain Tensioner With A Locking Pin:T40071 .
CAUTION:
Risk Of Destroying Due To Reversed Running Direction On A Used Drive Chain.
- Mark Drive Chain Running Direction With Arrows Using Paint For Reinstallation.
-- Remove The Bolts -1- And The Guide Rail.
-- Remove The Bolts -2- And The Chain Tensioner.
-- Remove The Timing Mechanism Drive Chain.