Overview - Secondary Air System, Market-Specific 2: Notes

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Air System Version 2 Assembly

Courtesy of AUDI OF AMERICA, LLC

Nut
- 9 Nm
Bonded Rubber Bushing
Secondary Air Injection Pump Motor -V101-
- Removing And Installing. Refer To SECONDARY AIR PUMP, REMOVING AND INSTALLING, MARKET-SPECIFIC 2 .
- Attach The Connector To The Bracket
- Check In "Guided Functions " Using The Vehicle Diagnostic Tester.
O-Rings
- Replace
Secondary Air Hose
Retaining Clip
O-Ring
- Replace
Seal
- Replace
Bolts
- 9 Nm
Vacuum Hose
Right Secondary Air Injection Combination Valve
- Checking. Refer to SECONDARY AIR INJECTION COMBINATION VALVES, CHECKING FOR FUNCTION AND LEAKS, MARKET-SPECIFIC 2 .
- Removing and installing. Refer to SECONDARY AIR INJECTION RIGHT COMBINATION VALVE, REMOVING AND INSTALLING, MARKET-SPECIFIC 2 .
Bolt
- 9 Nm
Secondary Air Injection Sensor 1 -G609-
- Removing and installing. Refer to SECONDARY AIR INJECTION SENSOR 1 -G609-, REMOVING AND INSTALLING, MARKET-SPECIFIC 2 .
O-Ring
- Replace
Secondary Air Hose
Bolt
- 9 Nm
Left Secondary Air Injection Combination Valve
- Checking. Refer to SECONDARY AIR INJECTION COMBINATION VALVES, CHECKING FOR FUNCTION AND LEAKS, MARKET-SPECIFIC 2 .
- Removing and installing. Refer to SECONDARY AIR INJECTION LEFT COMBINATION VALVE, REMOVING AND INSTALLING, MARKET-SPECIFIC 2 .
Vacuum Hose
Bolts
- 9 Nm
Seal
- Replace
Bolt
- 9 Nm
Bracket
- For the secondary air injection hose
O-Ring
- Replace
Secondary Air Hose
Bracket
- for Secondary Air Injection Pump Motor -V101-
Bolt
- 9 Nm