Front Muffler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening Specification. Refer To OVERVIEW - MUFFLER .

Install In Reverse Order Of Removal.Note The Following:

NOTE:

Replace The Seals And Self-Locking Nuts.

-- Install the exhaust system free of tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .

-- Install The Front Crossmember. Refer to UNDERBODY TRIM PANEL .

-- Install The Rear Noise Insulation. Refer To NOISE INSULATION, REMOVING AND INSTALLING .