Left Catalytic Converter, Removing And Installing : Removing
WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- The Transmission Is Removed.
-- Remove The Connector -1- For The Oxygen Sensor 2 After Catalytic Converter -G131- From The Bracket And Disconnect It.
NOTE:
Ignore Items -2, 3, 4- And The -arrows-.
-- Remove the nuts -arrows- and the left catalytic converter.
NOTE:
The Installation Location Is Shown With The Engine Removed.
Ignore -Item 1-.