Combination Valve, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi RS 5, 2014 Audi RS 5, and 2013 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note The Following:
- Tightening specifications. Refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM .
NOTE:
Replace the seals and the O-rings.
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
When installing, bring all cable ties back to same positions.
-- Install the plenum chamber bulkhead. Refer to Bulkhead .