Calibration Requirements
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- The camera lens must be clean.
- The vehicle must be standing on a firm and level surface.
- There must be sufficient open space around the vehicle.
- The parking brake must be set.
- The steering wheel must be in the 0 position and the wheels must be straight.
- All doors and the rear lid must be closed.
- No one should be in the vehicle.
- The vehicle must not be loaded (curb weight).
- Before each calibration: turn on the ignition.
The Calibration Tool :VAS6350 Consists Of The Following Parts:
- Calibration Tool - Wheel Center Mountings:VAS6350/1
- Calibration Tool - Spacing Laser:VAS6350/2
- Calibration Tool - Linear Laser:VAS6350/3
- Calibration Tool - Lane Change Calibration Tool:VAS6350/4