Valve Adapter

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

A - 5/8"-18 UNF thread for conical seal

B - Internal thread with valve opener

M10 x 1.25 VAG1785/9 (for connections with valve on high-pressure side)
M10 x 1.5 VAG1785/10 (for connections with valve on high-pressure side)

NOTE:

A Schrader valve is screwed into connection -A-.

A valve opener must be installed in the charging hose connection.

Various adapters from adapter set are also part of the Refrigerant Circuits Adapter Set 1:VAS6338/1 .

A/C Adapter Set:VAG1786

Courtesy of AUDI OF AMERICA, LLC

A - A/C Adapter Set - Adapter 1:VAG1786/1 (only for connections with small valve insert on low-pressure side)

B - Charging hose with union nut 5/8"-18 UNF (short version)

C - A/C Adapter Set - Adapter 2:VAG1786/2 .

NOTE:

For connections with large valve insert (standard on "Zexel/Valeo" compressors, gradual change to small valve insert from 10/1994), use is to be made of adapter VAG1785/10 (remove valve from adapter VAG1785/10 or install valve opener in charging hose -B-).

Beginning from production year 2006, the name of the "Zexel" A/C compressor was changed from "Zexel" to "Valeo".

Refrigerant Sockets:T10364

Courtesy of AUDI OF AMERICA, LLC

NOTE:

For removing and installing service connections and valve units when the refrigerant circuit is empty.