-- Tighten The Bolts As Follows While The Camshaft Adjuster Is Still Held Under Tension.

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Step	Bolt	Tightening Specification
1.	-1- to the exhaust camshaft	60 Nm
1.	-2- to the intake camshaft	60 Nm

-- Position the :T40079 on the exhaust camshaft adjuster on the right cylinder head.

Fig 1: Positioning Adapter T40079 On Exhaust Camshaft Adjuster At Right Cylinder Head

Courtesy of AUDI OF AMERICA, LLC

-- Position the :VAG1332 with the :VAG1332/9 on the :T40079 .

-- Have a second technician pre-tension the camshaft adjuster in the direction of -arrow- to 40 Nm.

Step	Bolt	Tightening Specification
1.	-1- to the intake camshaft	60 Nm
1.	-2- to the exhaust camshaft	60 Nm

-- Remove the :T40079 .

-- Remove the :T40070 on both cylinder heads -arrows-.

Fig 1: Mounting Camshaft Locating Tool T40070 To Both Cylinder Heads

Courtesy of AUDI OF AMERICA, LLC