LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1250 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> Wheel Bearing >> Wheel Bearing Unit, Removing And Installing >> Installing

Wheel Bearing Unit, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Installation Is The Reverse Of Removal, With Special Attention To The Following: 

Tightening Specifications. Refer To OVERVIEW - WHEEL BEARING .

-- Install the drive axle. Refer To DRIVE AXLE, REMOVING AND INSTALLING .

-- Tighten the wheel. Refer To WHEEL BOLT TIGHTENING SPECIFICATIONS .

scientia non olet · About LEMON Manuals