Tower Brace, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the plenum chamber cover. Refer To PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

-- Remove The Bolt -1- And Remove The E-Box From The Tower Brace In The Direction Of The -arrow-.

Fig 1: Identifying Bolt And E-Box To Tower Brace

Courtesy of AUDI OF AMERICA, LLC

-- Release The Connector Bracket On The Bottom Of The Connector And Push The Connector Toward The Rear From The Tower Brace.

-- Remove The Bolts -1- And Nuts -2- And The Tower Brace -3-.

Fig 2: Identifying Bolts, Nuts And Tower Brace

Courtesy of AUDI OF AMERICA, LLC