LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1250 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> SUBFRAME >> Stabilizer Bar, Removing And Installing >> Removing

Stabilizer Bar, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove The Noise Insulation. Refer To NOISE INSULATION, REMOVING AND INSTALLING .

A5 THROUGH AUGUST 2007 

Fig 1: Identifying Stabilizer Bar And Nuts & Clamps
GWWA40-10206Courtesy of AUDI OF AMERICA, LLC

-- Disconnect Left And Right Connectors -2-.

-- Remove The Left And Right Nuts -1- And Remove The Clamps -3-.

-- Remove The Stabilizer Bar.

A4/A5 FROM SEPTEMBER 2007 

Fig 2: Identifying Nuts (Install But Do Not Tighten)
GWWA40-10325Courtesy of AUDI OF AMERICA, LLC

-- Disconnect Left And Right Connectors -2-.

-- Remove The Left And Right Nuts -1- And Remove The Clamps -3-.

-- Remove The Stabilizer Bar.