SUBFRAME Without Steering Gear, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1332 40-200 Nm :VAG1332
- Engine Support Bridge:10-222A
- Engine Support Supplement Set:T40093A , needed depending on the engine. The exact description for engine support. Refer To ENGINE, REMOVING AND INSTALLING [FOR ENGINE(S) CALA] , ENGINE, REMOVING AND INSTALLING [FOR TRANSMISSION(S) 0B6] [FOR ENGINE(S) CAUA] , and ENGINE, REMOVING AND INSTALLING [FOR ENGINE(S) CFSA] .
- Engine and Gearbox Jack:VAS6931
- Engine/Gearbox Jack Adapter - Wheel Hub Support:T10149
- Tensioning Strap:T10038
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Service Information Prior To Starting Procedure.
Mandatory Replacement Parts
The Following Tools Can Be Used On All Engine Versions. The Instructions For Each Engine Describe The Tools Needed For That Particular Engine. Refer To OVERVIEW - SUBFRAME MOUNT [FOR ENGINE(S) CALA] , OVERVIEW - SUBFRAME MOUNT [FOR TRANSMISSION(S) 0B6] [FOR ENGINE(S) CAUA] , and OVERVIEW - SUBFRAME MOUNT [FOR ENGINE(S) CFSA] .