LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1250 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Installing >> Notes

Diagonal Brace, Removing And Installing: Installing: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Installation Is The Reverse Of Removal, With Special Attention To The Following: 

NOTE:

The Stamped Edge On The Diagonal Brace Near The Bolt Holes Must Be On The Bolt Head Side.

Pay Attention To The Tightening Sequence And The Pre-Tightening Specification.

scientia non olet · About LEMON Manuals