LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1250 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Installing >> Installed Position And Tightening Sequence:

Installed Position And Tightening Sequence:

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Diagonal Brace (-Arrow- Faces Direction Of Travel)
GWWA40-10375Courtesy of AUDI OF AMERICA, LLC

-- Install The Diagonal Brace (-Arrow- Faces The Direction Of Travel).

-- First Tighten The Bolts To 5 Nm In Sequence -1, 2 And 3- And Then Tighten Them To The Final Tightening Specification. Refer To -Item  ) OVERVIEW - SUBFRAME, A5 FROM 09/2007 - BOLT.

Tightening Specifications. Refer To OVERVIEW - SUBFRAME .

scientia non olet · About LEMON Manuals