Nut Versions For The Control Arm And Guide Control Arm Bracket

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Nut Versions For Control Arm And Guide Control Arm Bracket

Courtesy of AUDI OF AMERICA, LLC

Hex - Collar Nut -A- M12 wrench 21 mm

Tightening Specification: 145 Nm

Hex - Combination Nut -B- M12 18 mm

Tightening Specifications: 110 Nm

Hex - Combination Nut -B- M12 21 mm

Tightening Specification: 120 Nm

Hex - Combination Nut -B- M14 21 mm

Tightening Specification: 140 Nm